Arduino Btn to Display Img

#include <Adafruit_SSD1306.h>
#include <splash.h>
#define bitmap_height   128
#define bitmap_width    64
#include <Wire.h>
#include <Adafruit_GFX.h>
#define YELLOW 0xFFE0
#define OLED_RESET -1
Adafruit_SSD1306 display(OLED_RESET);
int buttonState1 = 0;
const int BUTTON_PIN1 = 2;
int toggle = 0;
const unsigned char s1 [] PROGMEM = {
//image code
};
const unsigned char s2 [] PROGMEM = {
//second image code
};

void setup() {
  
  pinMode(BUTTON_PIN1, INPUT_PULLUP);
  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
  display.clearDisplay();
 
}
 
void loop() {
  buttonState1 = digitalRead(BUTTON_PIN1);
  if (buttonState1 == LOW) {
    if (toggle ==0) {
    display.clearDisplay();
    display.drawBitmap(0, 0, s1, bitmap_height, bitmap_width, WHITE);
    display.display();
    toggle = 1;
  }
  else {
    display.clearDisplay();
    display.drawBitmap(0, 0, s2, bitmap_height, bitmap_width, WHITE);
    display.display();
    toggle = 0;

  }
  }
}

Push Button to Display Image →